3720A  DC Electronic Load

Product Overview   

Key Features 

• 4 basic functions : CC, CV, CR, and CP ; and 8 basic test modes : CCL, CCH, CV, CRL, CRM, CRH, CPV, CPC

• High-speedsequence, high-speed transient, short-circuit, battery discharge and other auxiliary functions

• Minimum operating voltage is less than 0.6V at the load's full rated current

• Optional zero-voltage test accessories are available - Programmable current slew rate

• Perfect protection assures high reliability in the most complicated of test environments

• Multiple groups of parameters and lists can be saved and recalled

• Ruggedized structure, exquisite user-friendly design and convenient operation

• Supports SCPI (Standard Commands for Programmable Instrumentation) and Labview, 

       and provides necessary PC software

High Reliability 

• Protective circuitry provides over-current, over-voltage, over-power, over-temperature and reverse polarity protection 

       to ensure the protection of the electronic load;

• A high-speed, power limiting circuit can limit input power rapidly when it is overloaded, thus there is no need to interrupt 

       testing. Equipment adaptability to complicated operational environments is thereby greatly enhanced.

• A high-efficiency, intelligent cooling system can effectively reduce system temperature and enhance power density;

• The input binding posts with their innovative design are especially suitable for large current testing. They are easy to operate,

       reliable and durable;

• The specially ruggedized case with its rubber bumpers protects the load thus effectively prolonging the unit’s service life.

       Great Performance 

• Circuit improvement greatly enhances the dynamic response of CR mode and widens the application scope of that mode;

• The innovative CP mode can test voltage sources, current sources, and effectively prevent short-circuits as well when the 

       tested power is insufficient;

• Minimum operating voltage is less than 0.6V at the load's full rated current. With optional low-voltage testing devices, 

      the maximum current can be achieved even though the input voltage is 0V. This is especially suitable for fuel cell, solar

      cell and other new energy test applications;

• By adopting an optimum design of calculation method and high-speed hardware circuitry, the D/A conversion rate can 

       reach 100kHz. The overall smoothness of slope control has been raised, meanwhile, the timing precision and resolution 

       of dynamic test and sequential test have also been improved;

• The 24 bit A/D and 17 bit D/A converters incorporated, provide this equipment with greatly enhanced setting and 

       measurement resolution. 

Multifunction

• Equipped with four basic test functions : CC, CV,CR, CP;

• High-speed transient operation with separate high/low lever time and rising/falling time control;

• Powerful sequential test function ; with a minimum step time of 10us ; and a maximum step time of 10000s. 

       Cyclic numbers can be adjusted freely and a sequence can be chained to another sequence to achieve even more 

       complex test procedures;

• Providingshort-circuit test, battery discharge test and other auxiliary functions;

• Remote input terminal and external trigger input terminals are provided. The remote measurement can monitor the

       input signal automatically, and it is not necessary to change wiring or modify settings during operation;

• 10 groups of setup parameters can be saved, and providing automatic uploading of preset parameters;

• By supporting SCPI, it is easy to build an ATE (automatic test equipment) system that works with other programmable

       instruments via optional RS232, USB and GPIB interfaces. 

Easy Operation

• Design optimized for portability and rugged reliability;

• Logical keypad design and convenient test operation;

• Easy-to-set test parameters coupled with a powerful sequence editing function;

• All electronic calibration - therefore no need to dismantle the equipment-chassis;

• Firmware can be updated online. 

Ordering Information  

 ​​ 

Warranty

• 1Yrs

Contents

• 기본

※ 자세한 사항은 'DataSheet'나 'Quick Start Guide'를 참조해 주세요.